How to measure a backsplash
- Split the backsplash into sections at every corner, cabinet end and appliance.
- Height is from the counter to the bottom of the upper cabinets, usually 18".
- Behind a range, measure up to the hood if you tile that high, often about 30".
- Subtract windows. Do not subtract outlets or switches.
- Mark any edge that does not stop at a wall, cabinet or counter. Those edges need trim.
How many tiles for a backsplash?
Tiles needed with 1/16" joints and 12% extra.
| Tile | 20 sq ft | 30 sq ft | 40 sq ft |
|---|---|---|---|
| 3" x 6" subway | 174 | 261 | 348 |
| 2" x 8" subway | 194 | 291 | 388 |
| 4" x 12" | 66 | 99 | 132 |
| 4" x 4" | 196 | 294 | 391 |
| 12" x 12" mosaic sheet | 23 | 34 | 45 |
Edges and trim
- Any tile edge you can see from the side needs a clean finish.
- Choose metal trim strips (often 8 ft long) or matching bullnose tile.
- The calculator counts exposed ends and top edges and turns them into pieces.
- Buy one extra trim piece. Miter cuts at corners use length.
Tip: buy all tile from the same lot number. Color can shift between batches, and a backsplash is at eye level.
Frequently asked questions
How do I measure a kitchen backsplash for tile?
Measure each wall section between cabinets, appliances or corners: width times height from the counter to the upper cabinets. Add the sections and subtract windows.
Do I subtract outlets from backsplash square footage?
No. Outlets are small and the tile around them still needs cuts. Subtract only windows and areas you will not tile.
How high is a standard kitchen backsplash?
Most US kitchens have 18 inches between the counter and the upper cabinets. Behind a range it often goes up to the hood, about 30 inches.
How much extra tile should I buy for a backsplash?
Buy 10 to 15% extra. Backsplashes have many cuts around outlets, windows and cabinet ends, and small jobs leave less room for error.
How many subway tiles do I need for a backsplash?
A 3x6 subway tile covers about 0.13 sq ft with grout, so 30 sq ft of backsplash needs about 261 tiles with 1/16 inch joints and 12% extra.
What trim do I need for a backsplash?
Any edge that does not stop at a cabinet, wall or counter needs a finished edge, like a metal trim strip or bullnose tile. This calculator counts those edges for you.
